Set the total rise, floor to floor. The app uses the fewest risers that keep each one at or under the tallest riser you allow (7 3/4" by default), then lays out the treads, the run and the pencil marks along the stringer's top edge. Each mark is worked out from the start, not added step by step, so the top mark never drifts.
The bottom floor gets no tread, but every other step does, so the stringer is cut one tread thickness shorter at the bottom. The app shows that cut under the tread thickness box.
No. The green and red badges use typical US residential limits (riser 7 3/4" or less, tread 10" or more, a rafter notch no deeper than a quarter of its depth, 1 1/2" of bearing). They are a guide only. Check your local code before you cut.
Yes. Tap FT-IN | MM at the top of any tool. Every box and answer switches, and anything you typed is converted exactly.
Every drawing, preset and answer, the first two pencil marks, the bottom drop, the notch check, area, square, the tape calculator and one saved job. One payment unlocks every pencil mark, the birdsmouth cut table and rafter tail, printable PDF cut-sheets and unlimited saved jobs. There is no subscription.
Tap the gear, then Restore purchase, or tap Restore purchase on the unlock screen. Use the same Apple Account you bought with.
No. Every tool, saved job and PDF works offline. Only the purchase and Restore purchase talk to the App Store.
Purchases are handled by Apple. Request a refund at reportaproblem.apple.com.